This Aeromotive fuel pump is configured for performance fuel delivery. Select it by required flow, operating pressure, fuel compatibility, mounting location, port sizes, and electrical demand rather than horsepower claims alone. For constant fuel pressure simply leave the MAP sensor portion of the kit disconnected.

Key Features

• Purpose-built fuel-pump configuration for the listed pressure and flow requirements
• Port, mounting, electrical, and fuel requirements are specific to this model
• For constant fuel pressure simply leave the MAP sensor portion of the kit disconnected.
• Exact manufacturer part number: 66141

Fitment

Specifications

What’s Included

One Aeromotive fuel pump in the exact configuration and quantity identified by this listing. Additional fittings, hoses, filters, wiring, relays, regulators, brackets, seals, tuning, and hardware are included only when expressly stated.

About Aeromotive

Aeromotive engineers performance fuel pumps, regulators, filters, tanks, rails, fittings, and control hardware for correctly designed street, racing, and powersports fuel systems.

Related Parts

• Aeromotive A1000 Fuel Pump – EFI or Carbureted Applications
• Aeromotive 700 HP EFI Fuel Pump – Black
• Shop the complete Aeromotive collection

Frequently Asked Questions

How do I size the VaporWorx Gen 2 CTS-V Returnless Pulse Width Modulation Fuel Module Controller Kit for my engine?
Use target power, fuel type, base pressure, boost pressure, voltage at the pump, and expected duty cycle. Follow Aeromotive’s current flow data for this exact model and include a safe capacity reserve.

Can this pump be used with E85, methanol, or diesel?
Fuel compatibility is model specific. Use only the fuels Aeromotive lists for this exact part number; do not infer compatibility from another pump in the same series.

Does this pump require a return-style fuel system?
That depends on the pump, regulator, controller, and vehicle strategy. Confirm the complete system design rather than selecting the pump by flow rating alone.

What wiring is required for this pump?
Size wire, fuse, relay or controller, grounds, and connectors for the manufacturer’s current draw and voltage requirements. Voltage drop directly reduces pump performance.

Should a pre-filter and post-filter be used?
Use the filtration layout and micron ratings Aeromotive specifies for this exact pump and fuel. Incorrect filtration can restrict flow or damage the pump and injectors.

Installation Instructions

1. Confirm Aeromotive part number 66141, the complete system design, fuel or fluid type, and all required supporting components.
2. Relieve system pressure, disconnect electrical power, work in a ventilated area, and eliminate ignition sources before opening any fuel connection.
3. Install with the exact port sizes, seals, mounting orientation, line support, filtration, wiring, and torque values in Aeromotive’s current instructions.
4. Prime and pressure-test the complete system; inspect every joint, seal, vent, and electrical connection for leaks, heat, abrasion, and voltage drop.
5. Verify stable pressure and safe operation under load, then recheck fittings and mounting after the initial heat cycles.