Demon-Style Window Hood for 2015-2023 Dodge Charger

This hood brings the aggressive Demon-inspired window design to your 2015-2023 Dodge Charger, with a cutout over the factory intake that shows off your engine bay while improving underhood heat extraction. It is built to mount using your factory hinges and latch, so there is no cutting or fabrication needed to bolt it on. Available in fiberglass, a carbon fiber and fiberglass hybrid, full carbon fiber, or forged carbon construction depending on the finish you select.

Hood vents not included! These can be purchase directly from Mopar, part numbers are included below.

• Right Hood Bezel: 68464718AB
• Left Hood Bezel: 68464719AB
• Center Hood Bezel: 68464737AA

Key Features

• Demon-Style Window Cutout – Exposes the factory intake area for a bold, aggressive look
• Direct Bolt-On Fitment – Mounts using your factory hinges and latch
• Heat Extraction Vents – Twin side vents help pull heat out of the engine bay
• Multiple Construction Options – Choose fiberglass, carbon fiber and fiberglass hybrid, full carbon fiber, or forged carbon
• Gloss Gel Coat Finish – UV-resistant gloss finish on carbon fiber and hybrid options
• Handcrafted Construction – Built and quality checked in the USA

Fitment

Specifications

What’s Included

• 1 x Demon-Style Window Hood (selected construction)

About Black Ops Auto Works

Black Ops Auto Works designs and builds carbon fiber and fiberglass exterior components for modern muscle cars, including this Charger hood, which is also sold through other major performance retailers under Black Ops’ own part number. Each hood is handcrafted and checked for fitment before it ships.

Frequently Asked Questions

Does the fiberglass version need to be painted?

Yes. The fiberglass version ships unpainted and is meant to be painted before installation, not installed as is.

Will this fit my Charger if it does not have the factory hood vents?

The hood is designed for the factory vent openings. If your Charger does not already have the OEM plastic hood vents, you will need to source them separately since they are not included with this hood.

Do I need hood pins to install this?

Hood pins are not required for installation since the hood uses the factory hinges and latch, but they are strongly recommended as a secondary safety measure on aftermarket hoods.

How long does professional installation typically take?

Installation time varies by shop, but comparable Charger hoods in this style typically take about 30 minutes to a few hours depending on whether additional fitment adjustment is needed.

What is the difference between the carbon fiber and forged carbon options?

Standard carbon fiber uses a 2×2 twill weave pattern, while forged carbon fiber has a marbled, speckled appearance from randomly oriented carbon fiber strands.

How should I clean and maintain the gel coat finish?

Wash it like any other painted or gel-coated panel and apply a pure carnauba wax periodically to help protect the gloss finish and its UV resistance.

Can I close the hood normally once it is installed?

Close it gently using open palms near the headlight area rather than slamming it, since aftermarket composite hoods are more sensitive to impact stress than factory steel hoods.

Does this hood work with all Charger trims from 2015 to 2023?

It is designed for SRT 392, SRT Hellcat, and Scat Pack Chargers from 2015 to 2023. Confirm your exact trim’s hood profile matches before ordering if you have a non-SRT trim.

Installation Instructions

1. Support the factory hood in the open position and remove it from the factory hinges with the help of a second person.
2. Transfer the factory hinges and latch mechanism to the new hood following your Charger’s factory hood removal points.
3. Position the new hood on the hinges and loosely secure the mounting bolts.
4. Align the hood for even panel gaps on both sides and at the front fascia before fully tightening the hinge bolts.
5. Confirm the latch engages properly and the hood sits flush before closing it for the first time.
6. Install hood pins if you are using them as a secondary safety measure.

Prop 65 Warning

WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.