This Aeromotive fuel filter or replacement element is designed to protect a performance fuel system while maintaining appropriate flow. Confirm micron rating, element material, housing compatibility, port size, installation position, and fuel type before ordering. P/N 12301 10-m Fabric Filter Assembly AN-10 ports with classic bright-dip Red finish An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance.

Key Features

• Micron rating and element media are selected for the intended position in the fuel system
• Housing, port, flow, service, and fuel requirements are model specific
• P/N 12301 10-m Fabric Filter Assembly AN-10 ports with classic bright-dip Red finish An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance.
• Exact manufacturer part number: 12301

Fitment

Specifications

What’s Included

One Aeromotive fuel filter in the exact configuration and quantity identified by this listing. Additional fittings, hoses, filters, wiring, relays, regulators, brackets, seals, tuning, and hardware are included only when expressly stated.

About Aeromotive

Aeromotive engineers performance fuel pumps, regulators, filters, tanks, rails, fittings, and control hardware for correctly designed street, racing, and powersports fuel systems.

Important Disclosures

• Emissions use restrictions apply. Confirm the current manufacturer classification and all federal, state, and local requirements before purchase or installation.
• California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Aeromotive Pro-Series In-Line Fuel Filter – AN-12 – 100 Micron SS Element
• Aeromotive In-Line Filter – (AN-10) 100 Micron SS Element
• Shop the complete Aeromotive collection

Frequently Asked Questions

Where should the In-Line Filter – (AN-10) 10 Micron fabric Element be installed in the fuel system?
Placement depends on micron rating, element area, pump design, and Aeromotive’s system diagram. Coarse pre-filters and fine post-filters serve different purposes.

Is the filter element cleanable or replaceable?
Service method depends on the exact element material. Inspect and service it using Aeromotive’s current instructions, replacing damaged elements or seals.

Which fuels can be used with this filter?
Confirm compatibility for the housing, element, seals, and fittings. Gasoline compatibility does not automatically establish E85, methanol, or diesel compatibility.

Will a smaller micron rating restrict fuel flow?
Finer filtration can add restriction, especially when contaminated. Size the filter for required flow and monitor service intervals and pressure drop.

Installation Instructions

1. Confirm Aeromotive part number 12301, the complete system design, fuel or fluid type, and all required supporting components.
2. Relieve system pressure, disconnect electrical power, work in a ventilated area, and eliminate ignition sources before opening any fuel connection.
3. Install with the exact port sizes, seals, mounting orientation, line support, filtration, wiring, and torque values in Aeromotive’s current instructions.
4. Prime and pressure-test the complete system; inspect every joint, seal, vent, and electrical connection for leaks, heat, abrasion, and voltage drop.
5. Verify stable pressure and safe operation under load, then recheck fittings and mounting after the initial heat cycles.