The Radium Engineering BMW E36/E46 Fuel/Brake Line Retainer Kit is a mounting component for the configuration named in the product title. Confirm the supported part, hole spacing, mounting surface, orientation, clearance, and included hardware.

Key Features

• Mounting pattern and supported component are part specific
• Orientation, clearance, fastener grade, and surrounding lines must be checked
• Recheck fastener torque after initial operation when required

Fitment

This is a universal or configuration-specific fuel-system component. Confirm dimensions, port and thread standards, hose size, fuel compatibility, pressure range, and mating components before ordering.

Specifications

What’s Included

• The Radium Engineering component identified by manufacturer part number 20-1176
• Only fittings, seals, brackets, wiring, or hardware specifically listed for this exact configuration

Brand Information

Radium Engineering develops fuel delivery, crankcase ventilation, fluid-control, and motorsport plumbing components. Port standards, pressure range, fuel compatibility, mounting, and vehicle fitment remain manufacturer-part-number specific.

Related Parts

• Radium Engineering Fuel System Parts
• Performance Brackets
• Fuel Delivery Parts
• Fuel System Hardware

Frequently Asked Questions

Which component does this bracket support?
Match the exact Radium part number, mounting pattern, orientation, and vehicle or chassis location. Confirm whether fasteners are included.

Can this component be used with E85 or other ethanol blends?
Fuel compatibility depends on the exact seals, element, hose, and component materials. Confirm the manufacturer specifications for every part in the system before using ethanol fuel.

Should this fuel-system part be installed professionally?
Professional installation is recommended whenever the work involves tank removal, custom plumbing, wiring, pressure adjustment, fabrication, or motorsport safety requirements.

What should be checked before the first startup?
Verify every connection, seal, fastener, hose route, electrical circuit, and pressure setting. Prime and pressure-test the complete system, then correct any leak before starting the engine.

Installation Instructions

Depressurize the fuel or fluid system, disconnect power when required, work in a ventilated area away from ignition sources, and protect open lines from contamination. Assemble every connection with the correct seal and torque method, secure plumbing and wiring away from heat and abrasion, then prime and pressure-test the complete system before operation.